10
11
INSTALLATION
CAUTION BEFORE INSTALLATION
•
Do not plug in before installation
•
If you need an electric power system or extension,
please consult qualified electrician.
•
Please contact out service center at 847.458.2334
when you want to reinstall the bidet product (move or replacement).
1. Turn off the water.
•
Shut off the water supply valve.
Drain the toilet tank completely.
Then remove the existing fill
valve water supply hose.
•
Place the plate and guides over
each mounting hole. Insert the
mounting bolts through the
plate and mounting holes.
•
Slide cone packing and
washers onto the bolts
then fasten to securely
mount bidet seat to toilet.
•
Remove mounting bolts to
release existing toilet seat from
the toilet.
•
Remove existing supply hose
connected to the toilet tank.
Make sure not to damage the
water supply hose.
•
Install the T-valve at the
thread from the tank.
•
Remove the existing supply
hose from the toilet tank
•
If your shut off valve is 1/2” size,
use supplied 1/2” conversion nut
as shown.
2. Remove the existing
seat and lid.
3. Connect the T-valve.
4. Connect the water supply
hose to the assembled
T-valve.
Water supply hose
1/2"conversion nut
5. Installation Catch Plate.
6. Bolt and Nut Assembly.
Summary of Contents for bioBidet BB800
Page 1: ...OWNER S MANUAL BB800 ...