background image

5

IMPORTANT SAFEGUARDS & CAUTIONS

READ ALL OPERATING INSTRUCTIONS BEFORE INSTALLATION

 

This product should be installed according to this manual. 

 

Read this manual carefully and install properly.

 

Do not attempt to service this appliance yourself.

 

Doing so will void the warranty.

READ ALL INSTRUCTIONS BEFORE USING

 

Do not open the product to repair or remodel. Only qualified service 
personnel should service this product. Do not use attachments not 
recommended by the manufacturer. 

 

Connect this product to cold water supply pipe carrying portable water. 
Do not connect to an industrial water supply line that does not carry 
water of drinking quality. 

 

Low Temperature Burns 

- A burn occurs when the skin has been exposed 

to high temperatures. However, a low temperature burn may occur when 
the skin has been in contact with an object at relatively low temperature 
(about 104°F). Close supervision is necessary when this product is used 
by children or adults with sensitive skin. 

 

If using any chemical toilet bowl cleaner, be sure to wipe up any spills 
that splash onto this Electric Bidet. Do not use benzene or any acid 
chemical detergent. Only neutral detergent permitted. 

 

Do  not plug in the power cord before connecting the water supply hose. 

 

This product must be grounded. An approved Ground Fault Circuit 
Interrupt must be used. 

 

Do not splash water on this product. Please provide adequate ventilation 
to avoid damage to electronic components due to high level of humidity. 
It is necessary to provide adequate ventilation with a fan, open door or 
open a window when bathing. 

 

Do not touch the power cord with wet hands. Do not reach for a product 
that has fallen into water. Unplug immediately!

CAUTIONS

 

Never operate this product if it is not working properly, if it has been 
dropped or damaged, or dropped into water. Return the product to a 
service center for examination and repair. 

 

Do not obstruct or put anything into the dry air outlet.  
Do not apply excessive force to the shower nozzle. 

 

Do not stand or sit on the seat cover lid. It is not designed  
to support a user’s body weight. 

 

Allow the seat and lid to close automatically do not force the lid closed. 

 

Do  not strain or push the connected hose and tube connector. It may 
cause water leakage. Never drop or insert any object into any opening or 
hose. Use proper plumbing supplies if any modifications are to be made. 

 

Use this product only as described in the operating instructions. Never 
use while sleeping or drowsy. Do not use while bathing. 

 

Be careful so that this product does not become  
stained with excrement and urine. 

 

Drain the water from the unit and unplug the power if it  
is not going to be used for an extended period of time.

SAVE THESE INSTRUCTIONS

 

This product must be connected to a standard voltage power source.  
Do not connect power cord if the cord is damaged or broken.  
Do not plug the unit into a loose electric outlet. 

 

Please disconnect the power cord when you clean this product or  
detach it from the toilet bowl. Do not supply electrical power to the  
unit until the plumbing work has been completed. 

 

Keep the electrical cord away from heated surfaces to prevent a  
fire hazard. Also Keep any flammable materials away from this  
product at all times. 

Summary of Contents for bioBidet BB800


















Reviews: