background image

Model: 37275-Series

DESIGNER STYLED MARINE
TOILET

FEATURES

• Very quiet flush cycle — like a household toilet

• Single button flush actuator —with dual function water

level control switch

• Supplied with Par-Max 4 self-priming pump to provide

sea water or lake water to rinse the toilet bowl

• Vitreous china bowl available in compact 14

"

height

or standard 17

"

height

• Available in White or Bone

• Baked enamel seat & cover

• High capacity waste macerator and bowl discharge

pump

• All toilet plumbing and wiring connections are 

internal-out of sight 

SPECIFICATIONS

Ports:

PAR-MAX Pump and Toilet
Inlet —3/4

"

Hose Barb 

Outlet —1

"

Hose Barb

Motor & Switch:

Pump and Toilet Meet U.S.C.G.
Regulation 183.410 and 
ISO 8846 Marine for 
Ignition Protection.

Toilets are marked

and 

comply with EN50081-1 
for suppression of electro-
magnetic interference.

Normal Water

1-2 Quarts (Litres)/Flush 

Consumption:

OPERATION

The Designer Styled Toilets with the popular Quiet-Flush
system provide both quiet operation and user control of
water levels in the toilet bowl. A single large push-button
switch provides a simple flush mode by activating both the
rinse water supply and the macerator discharge pump
simultaneously. An additional rocker switch offers inde-
pendent control of the rinse water supply and discharge
pump separately so the bowl water level can be easily
raised or lowered by the user. This provides a method of
minimizing water use, when desired, as well as a means
of raising the water level in the bowl when appropriate for
user comfort.  It also allows for complete evacuation of the
bowl water while underway in rough sea conditions.

Model: 37275-Series

Model Number

Description

37275-0092

Compact White Toilet 14

"

, 12 Volt EMC

37275-2092

Compact Bone Toilet 14

"

, 12 Volt EMC

37275-0094

Compact White Toilet 14

"

, 24 Volt EMC

37275-2094

Compact Bone Toilet 14

"

, 24 Volt EMC

37275-1092

Standard White Toilet 17

"

, 12 Volt EMC

37275-3092

Standard Bone Toilet 17

"

, 12 Volt EMC

37275-1094

Standard White Toilet 17

"

, 24 Volt EMC

37275-3094

Standard Bone Toilet 17

"

, 24 Volt EMC

INSTALLATION

The 37275-Series Designer Styled Toilet includes the
Quiet-Flush Toilet pumping system and is supplied with
a dedicated PAR-MAX 4 pump to provide either sea or
lake water to rinse the toilet bowl when flushing the 
toilet. This pump is intended to be located remotely from
the toilet but will function best if the distance from the 
toilet is kept to a minimum. Because it is self-priming, it
may be located above the vessel’s waterline. It must be
installed with the Pumpgard strainer (provided with the
toilet) located somewhere in the inlet plumbing to the
pump. The toilet also includes a multi-function flush 
control which should be installed in a bulkhead location
that is convenient to the toilet and allows access for

43000-0665  10/11/02  5:56 PM  Page 1

Summary of Contents for JABSCO 37275 Series









Reviews: