Bematech LR1100, Programming Manual, Page: 76 / 80

LR1100 Programming Manual V1.2
m Function
0 Forward Direction (Paper Feed Direction)
1 Reverse Direction
nL, nH specify the amount of adjustment. Adjustment = (nH
×
256 + nL)
×
0.125 mm.
[Notes]

When processing this command while defining a macro, the macro definition is
immediately terminated and the command commences with processing.

The black mark detection position (a = 1) is affected by the following command
operations.
 
FF
 
GS FF

The paper cutting position after black mark detection (a = 2) is affected by the
following command operation.
 
GS V m n

Because this command is executed when processing a normal command after it is
stored once in the reception buffer, there may be a delay between the reception of
the command from the reception buffer to the actual operation.
[Reference] FF, GS FF, GS V
GS FF
[Name] Feed black-marked paper to print starting position (top of form)
[Format] ASCII GS FF
Hex 1D 0C
Decimal 29 12
[Description] Feeds the marked paper to the print starting position (TOF).
[Notes:]

This command is enabled only when the BM sensor is set to be effective.

This command sets the next print position to the beginning of the line.

If this command is executed at the print starting position of the marked paper, the
printer does not feed the marked paper to the next print starting position.
[Reference] GS ( F, FF
GS C 0 n m
[Name] Select counter print mode
[Format] ASCII GS C 0 n m
Hex 1D 43 30 n m
Decimal 29 67 48 n m
[Range] 0

n

5
0

m

2, 48

m

50