LR1100 Programming Manual V1.2
When characters are enlarged with different sizes on one line, all the characters on
the line are aligned at the baseline.
The
ESC !
command can also turn double-width and double-height modes on or
off. However, the setting of the last received command is effective.
[Default]
n = 0
[Reference]
ESC !
GS * x y d1…d(x
×
y
×
8)
[Name]
Define downloaded bit image
[Format]
ASCII GS
x y d1...d(x
×
y
×
8)
Hex
1D 2A x y d1...d(x
×
y
×
8)
Decimal 29 42 x y d1 ...d(x
×
y
×
8)
[Range]
1
x
255
1
y
48 (where x
×
y
1536)
0
d
255
[Description] Defines a downloaded bit image using the number of dots specified by x and y.
x specifies the number of dots in the horizontal direction.
y specifies the number of dots in the vertical direction.
[Notes]
The number of dots in the horizontal direction is x
×
8; in the vertical direction it is y
×
8.
If x
×
y is out of the specified range, this command is disabled.
The d indicates bit-image data. Data (d) specifies a bit printed as 1 and not printed
as 0.
The downloaded bit image definition is cleared when:
1)
ESC @
is executed.
2)
ESC &
is executed.
3) Printer is reset or the power is turned off.
The following figure shows the relationship between the downloaded bit image and
the printed data.
