LR1100 Programming Manual V1.2
The pulse ON time is [t x 100 ms] and the OFF time is [ t x 100 ms].
[Details]
When the pulse is output to the connector pin specified while
ESC p
or
DEL DC4
is
executed while this command is processed, this command is ignored.
With a serial interface model, this command is executed even when the printer is
receive the command.
With a parallel interface model, this command is not executed even when the printer
is receive the command.
If printer data includes the same character strings as this command, the printer
performs the same operation specified by this command. The user must consider
this.
This command should not be used within the data sequence of another command
that consists of 2 or more bytes.
This command is effective even when the printer is disabled with
ESC =
(Select
peripheral device).
[Reference]
ESC p
ESC SP n
[Name]
Set right-side character spacing
[Format]
ASCII
ESC SP n
Hex
1B 20 n
Decimal
27 32 n
[Range] 0
n
255
[Description]
Sets the character spacing for the right side of the character to [n
×
0.125 mm (n
×
0.0049")].
[Notes]
The right-side character spacing for double-width mode is twice the normal value.
When characters are enlarged, the right-side character spacing is n times normal
value.
This command does not affect the setting of Kanji characters.
This command sets values independently in standard mode.
[Default]
n = 0
ESC ! n
[Name]
Select print mode(s)
[Format]
ASCII
ESC ! n
Hex
1B 21 n
Decimal
27 33 n
[Range]
0
n
255
[Description]
Selects print mode(s) using n as follows:
Bit
Off/On
Hex
Decimal
Function
0
Off
00
0
Character Font A (12×24).
On
01
1
Character Font B (9×17).
