Reference Manual
BLR-CM/BLR-CM3phase
Rev. 08
2018-09
23
2.5.6.1
Display
The following masks can be selected for the top display area by pushing the
◄►
-key. This masking is permanently
displayed. After leaving this submenu the setting is stored automatically. The following masks can be selected:
Cos φ, DI, M, DO: Display of power factor and status of inputs and outputs (○=inactive,
●=active)
Cos φ, ΔQ: Display of power factor and control deviation
Cos φ, valid Target cos φ (1 or 2): Showing of power-factor and of the active target
power factor (e.g. tariff switching with digital input).
2.5.6.2
Contrast
The contrast of the LCD-display can be adjusted by pushing the + / - keys. After leaving this submenu the setting is stored
automatically.
2.5.6.3
Password
By pushing the + / - keys the password can be changed. Reaching the last digit the new password is stored by pushing
the
◄
┘-key. (set the password to 0000 the password protection is switched off)
