![background image](http://html1.mh-extra.com/html/beltronics/sti-driver-sti-driver-radar-detector/sti-driver-sti-driver-radar-detector_owners-manual_2730791005.webp)
Radar Antenna and Laser Lens
The rear panel of your STi DRIVER should
have a clear view of the road ahead. For
best performance, do not mount the
STi DRIVER directly behind
windshield wipers or tinted
areas.
Page 6
Alphanumeric Display
The STi DRIVER’s display will show
Highway, AutoScan, City, or City NoX as its
power-on indication. If you prefer, you can
choose other power-on indications.
Pages
12-15
During an alert, the display will indicate
the radar or laser band, and a precise bar
graph of signal strength.
Page 10
Note: In the Dark Mode the display will
not light during an alert.
Page 9
Quick Reference Guide
To begin using your STi DRIVER,
just follow these simple steps
1
Plug the small end of the power cord
into the side jack of the detector, and
plug the large end of the power cord
into your vehicle’s lighter socket.
2
Mount your STi DRIVER on the
windshield using the supplied
windshield mount.
3
Press the PWR button, located on the
left side of the front panel, to turn the
STi DRIVER on.
4
Press and hold the VOLUME/MUTE
button to adjust the volume level.
Please read the manual to fully understand
STi DRIVER’s operation and features.
QuickMount Slot
Insert STi DRIVER’s adjustable Windshield
mount into this slot.
Page 7
QuickMount Button
Press the button, and slide the Windshield
mount into one of its four locking positions.
Page 7
Power
Press the PWR button to turn the STi
DRIVER on or off.
AutoMute
STi DRIVER’s patented AutoMute
automatically reduces the volume level of
the audio alert after a brief period. If you
prefer, you can turn AutoMute off.
Page 8
Programming
The STi DRIVER is ready to go, just plug it in
and turn it on. But you can also easily
change 9 features for your preferences.
Pages 12-16
4
Rear Laser Port
Receives laser signals from behind the
vehicle.
Power Jack
Plug the power cord into this connector.
Page 6
Earphone Jack
Accepts standard 3.5mm mono earphone.
VOLUME/MUTE Button
Press and hold the VOLUME/MUTE button
(below the display) to adjust the alert
volume level.
Briefly press this button to silence the
audio for a specific alert. (The audio will
alert you to the next encounter.)
Page 8
Sensitivity Button (SENS)
Switches between Highway, AutoScan, City
and City NoX settings. In general, we
recommend the AutoScan mode.
Page 9
5
130.com.ua
Autogood products «130»