Reset to Factory Settings
You can reset your unit to factory settings for volume,
DARK
,
AUDIO
,
CITY
and Selectable Features. With the unit
OFF
, press and hold
CITY
button, then press
AUDIO
and
PWR
/
VOL
buttons simultaneously.
The display will briefly show “
RESET
” and provide two “beeps”.
Your unit is now reset to its original factory settings and ready for
operation.
Safety Warning System
®
, VG-2 Guard
®
Alert, sws
™
Digital
Voice Messages and Radar/Laser Digital Voice prompts
are
features which may be selected
ON
or
OFF
, depending upon
your preference.
Safety Warning System
®
(sws
™
)
When
ON
, unit will provide an alarm and text message when
signals from sws
™
transmitters are detected. Factory setting
is
ON
.
VG
-2 Guard
®
Alert
When activated, unit will detect signals from Interceptor
VG
-2
transmitters. Factory setting is
OFF
.
Note—engage
VG
-2 Guard
®
only in areas known to use the
Interceptor
VG
-2.
Safety Warning System
®
(sws
™
) with Digital Voice Messages
When “
SWSv o i c e
” is selected, unit will provide Digital Voice
announcements when sws
TM
transmitters are detected. Factory
setting is “
SWSv o i c e
”. When “
SWSc l i c k
” is selected, Digital
Voice is replaced by “tone/clicking” only.
Radar/Laser Digital Voice prompts
When “
VOICEo n
” is selected, unit will provide Digital Voice
prompts followed by “beeps” when X/K/Ka and Laser signals
are detected. Factory setting is
ON
. When “
VOICEo FF
” is
selected unit will sound unique audio tones only.
SELECTABLE FEATURES
9