3.
Use a screw driver or a small coin to adjust the angle of the
suction-cup mount until the base plate is level.
4.
Slide detector onto base plate unit, it snaps into place.
Note: Some vehicles have a plastic coating on the inside of the wind-
shield designed to protect occupants in case of an accident. Use of
the windshield bracket on this type of windshield can permanent-
ly mark the surface. Check with your dealer if you are unsure
whether your vehicle is equipped with this type of windshield.
Visor Mounting
1. Remove the mounting bracket cover by pressing on the raised
dots and pushing outward. Store the cover in a safe place.
2. Slide the visor clip onto the top of the detector until it snaps into
place. Clip the detector to the edge of the sun visor nearest the
windshield.
Fuse Replacement
If the fuse has blown, remove the tip from the lighter plug
followed by the old fuse. Replace the fuse with a 1-amp, 3
AG
fuse. Defeating the fuse protection can damage your unit or
your vehicle’s electrical system and will void your warranty.
12