background image

Laser Alerts

When Laser is detected, the display will flash “

LASER

coupled with a distinct Laser audio alert. If a vehicle is a long
distance from the source of Laser pulses, fewer pulses will
generally be received. The closer the vehicle is to the source of
Laser pulses, the greater the likelihood of receiving a steady
stream of Laser pulses. The reason for this is the aiming
stability of the Laser gun and the fact that it is difficult to hold
the gun absolutely still. Any movement of the gun results in
motion of the beam at the target. The further the target, the
greater the displacement of the beam and the shorter the dwell
time of the beam at the target point. Therefore, there is the
possibility of receiving only a few Laser pulses. Due to these
characteristics, all Laser alerts should be taken seriously.

VG-2 Guard

®

Alert

Whenever your EXPRESS 935 detects signals from the
Interceptor 

VG

-2 (Radar Detector Detector), the 

VG

-2 Guard

®

feature engages. (

VG

-2 Guard

®

must be selected 

ON

see page

9 for more information

). A distinct, 2-second audio warning

coupled with the Digital Voice announcement and Text
Message of “

VG

-2 

alert

”confirms activation of 

VG

-2 Guard

®

.

This message continues for as long as 

VG

-2 Guard

®

is

activated. 

During the 

VG

-2 alert your unit does not detect

Radar or sws

signals. However, the presence of the

Interceptor 

VG

-2 indicates that traffic is being monitored

and speed measurements may be taken. When the
Text Message of “

VG

-2 

alert

” is over, your unit resumes

scanning for Radar and sws

signals.

Note: activation of 

VG

-

2

Guard

®

does not affect detection of Laser signals.

Safety Warning System

®

(sws

) Alerts

With the Safety Warning System

®

feature 

ON

and an sws

transmitter in use, your detector will provide a unique, 2 second
sws

tone coupled with a Safety Warning System

®

category

word (i.e. “

Ha z d Zo n e 

” indicating 

Highway Hazard Zone

Advisory

) to quickly orient you to the type of situation

ahead. This introductory message is followed by a specific Text
Message i.e. “

SHARP CURVE AHEAD

” and Digital Voice

17

Summary of Contents for Express 935

























Reviews: