background image

Brightness

BrtAuto

In this setting, the brightness for the display
and backlit buttons are controlled 
automatically by the ambient light in the
vehicle. Sunlight will increase the 
brightness level, while dim or no light
(night driving) will decrease the brightness.

BrtMin

In this setting, the display and backlit
buttons are set to a minimum light level.
This setting is retained in memory even if
the power is turned off.

BrtMed

In this setting, the display and backlit
buttons are set to a medium light level. This
setting is retained in memory even if the
power is turned off.

BrtMax

In this setting, the display and backlit
buttons are set to a maximum light level.
This setting is retained in memory even if
the power is turned off.

BrtDark

In this setting, the display and backlit
buttons will be totally dark. The supplied
SmartPlug will provide the only visual indi-
cation that the Sti is operational.

16

Details of Programming

Features and Specifications

Operating Bands

• X-band 10.525 GHz ±25 MHz
• K-band 24.150 GHz ±100 MHz
• Ka-band 34.700 GHz ±1300 MHz
• Laser 904nm, 33 MHz bandwidth

Radar Receiver

• Dual-Horn Antenna Casting
• Superheterodyne, dual LNA
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)

Laser Detection

• Quantum Limited Video Receiver 
• (5) Optical Laser Sensorss

Display Type

• 280 LED Alphanumeric
• Bar Graph, Threat Display

or Tech Display

• Automatic, plus 4 levels of fixed brightness 

including full Dark

Power Requirement

• 12VDC, Negative Ground
• Coiled SmartPlug

with Mute Button (included)

• Direct-wire SmartPlug

(included)

Programmable Features

• Power-On Indication
• Alert Lamp
• Voice Alerts
• Power-On Sequence
• Signal Strength Meter
• AutoMute
• Display Brightness
• Bands

Sensitivity Control

• AutoScan
• Highway
• City

Additional Patented Technology

• Auto Calibration Circuitry
• Mute/AutoMute

/SmartMute

• TotalShield

Technology

Dimensions (

Inches)

• 1.25 H x 2.75 W x 4.75 L

Patented Technology

US patents: 
6,836,238 6,693,578 6,614,385 6,587,068
6,400,305 6,249,218 6,069,580 5,668,554
5,600,132 5,587,916 5,559,508 5,365,055
5,347,120 5,446,923 5,402,087 5,305,007
5,206,500 5,164,729 5,134,406 5,111,207
5,079,553 5,049,885 5,049,884 4,961,074
4,954,828 4,952,937 4,952,936 4,939,521
4,896,855 4,887,753 4,862,175 4,750,215
4,686,499 4,631,542 4,630,054 4,625,210
4,613,989 4,604,529 4,583,057 4,581,769
4,571,593 4,313,216 D314,178 D313,365
D310,167 D308,837  D296,771 D288,418
D253,752
Canadian patents:
2,330,964 1,295,715 1,295,714 1,187,602
1,187,586
European patent:
1,145,030
Other patents pending. Additional patents
may be listed inside the product.

17

Technical Details

Bands

BandsDFT

In this setting, the factory default settings
for radar and laser are monitored.

This is the factory setting, and it is

highly recommended that you use your STi
in this mode. 

BandsMOD

In this setting, STi will warn you with an
audible alert, and associated text message
stating which band has changed from the
original factory setting (i.e. “SWS  ON”).
This warning is displayed during the start
up sequence (standard or fast).

WARNING: 

Do not turn off a band unless

you are absolutely certain that there are
no traffic radar guns using that specific
band in your area.

STi Manual  3/28/05  3:39 PM  Page 19

Summary of Contents for Bel STi

















Reviews: