Belshaw Brothers BXC Smartbake, Manual

Page: 10 / 53

Belshaw Bros., Inc.
š
1750 22
nd
Ave. S.
š
Seattle, WA 98144
š
Phone 206-322-5474
š
Fax 206-322-
5425
4 MN-1881EN BXC Smartbake Oven
Function of settings:
Power Levels : Not used in current
configuration.
Temperature : The temperature the oven will
bake at for the specified phase. Can be set
from 122
“
F to 482
“
F (50
“
C to 250
“
C)
Bake Duration : The length of time in minutes
the oven will bake in the specified phase.
For example, Phase 1 set at 2 min., Phase 2
set at 4 min., and Phase 3 set at 10 min. has a
total bake time of 16 minutes.
Steam Duration : The length of time in seconds
that steam will be injected into the oven at
the beginning of the phase.
Note: Can be set from 0 to 20 seconds and
will only operate if the temperature is above
250
“
F (120
“
C).
Fan Cycles : The number of times the fan will
reverse rotation from clockwise to
counterclockwise and back.
Note: Can be set from 0 to 9. Do not set the
fan cycles number higher than 1 cycle per
minute of bake time.
Fan Dwell : The amount of time in seconds that
the fan will stay off during a rotation change.
Note: Can be set from 8 to 15.
Note: The heating elements are off during the
Fan Dwell time.
Damper Delay : The amount of time in minutes
the damper will wait before opening during
one bake cycle.
Note:
š
Can be set from 0 to 99.
š
If this time is set higher than the total
bake time, the damper will not open.
š
The damper will only open once during
a complete bake cycle and will close at
the end of the bake cycle.