After completing the installation process, confirm normal
operation for each item below.
3-4 Confirmation guideline following installation
Confirmation
item
Check points
Confirmation
method
Sensor
response
Brightness
adjustment
with the dial
Unit operation
The light can be turned on and off by moving a hand across the perception
range of the touchless switch sensor window within a distance of 65 mm.
While the light is on, the unit can be switched between operation mode and
resin mode by holding a hand for a specified time within a distance of 65 mm
from the touchless switch sensor window.
During operation mode, the brightness can be adjusted by turning the bright-
ness adjustment dial.
The light head is retained in any position.
There is no noise or looseness while operating the light head.
* Following unpacking, the light head movement (vertical turn or lateral turn)
may be heavy. This is normal, and the light head becomes lighter after
moving it several times.
Operate
the parts
Operate
the parts
Operate
the parts
Operate
the parts
Do not directly expose human eyes to LED light.
Exposure may hurt human eyes.
3 Installation
WARNING
50
Summary of Contents for Bel-Nova AL-D101G
Page 1: ...Bel Nova INSTALLATION INSTRUCTIONS...
Page 55: ...NOTE...
