Bellucci Slim Latte Instruction Manual Download Page 16 | Manualshive

Page: 16 / 21

Bellucci Slim Latte Instruction Manual Download Page 16

Bellucci Slim Latte Automatic Coffee Machine

Instruction Manual
Page 16 of 21

MODE SELECTION

The machine has three different setting: default setting, ECO mode and speed mode. In ECO mode, the
appliance helps to save more energy. In speed mode, the user can make their coffee faster than in default
setting.

ECO Mode

Speed Mode

Default Setting

Illumination Light

No

Yes

Yes

Pre-brewing

*

Yes

No

Yes

Auto shut off time

10mins

30mins

20mins

Cup Volume memory

Yes

Yes

Yes

*Note: The pre-brewing function moistens the grounded beans in the brewer with a small amount of water
before full extraction. This expands the coffee grounds to build up a greater pressure in the brewer which
help extraction of all the oils and full flavor from the grounded beans.

1.

When the machine is in standby condition, press and holds the

for 5 seconds.

2.

The following button will have the following indications in different settings:

Cappuccino button

Latte Macchiato button

Espresso button

In ECO Mode

Flashing

Lights ON

Flashing

In Speed Mode

Flashing

Flashing

Lights ON

In Default Setting

Lights On

Flashing

Flashing

Press the Cappuccino button for ECO mode, Latte button for speed mode and Espresso button for default

setting. Two Beep sound will be heard indicates that the mode is being selected. (Note: If you are pressing

the relative lights on button for each mode, the machine will not response).

3.

If you would like to remain the setting unchanged, press

again or wait for 5 seconds for the machine

to return to the standby condition.

«
...
14
15
16
17
18
...
»

Summary of Contents for Slim Latte






















Reviews:

No comments