8
Press the button to confirm that you have a
dial tone. If you do not get a dial tone, review steps
3 through 11. If you still do not have a dial tone,
refer to the Problem Solving section on pages
41~42.
TALK
Belt Clip Installation
With the back of the
HANDSET
facing up, insert
one side of the BELT CLIP HOOK into the
matching slot at the top side of the
HANDSET
.
Press down on the opposite side of the BELT CLIP
until the other hook locks into the slot on the side
of the
HANDSET
.
You are now ready to use your new
BellSouth Cordless Telephone.
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
BELT CLIP
HOOK
7
9.
Slide the
HANDSET
BATTERY COMPART-
MENT COVER firmly into place in its closed
position.
10. IMPORTANT: Before initial use, charge the
HANDSET for 12 hours.
11.
TONE/PULSE Select Switch:
A.
If your home is equipped with a tone
dialing system, set the TONE/PULSE
Select Switch to the TONE position.
B.
If you have a rotary dialing system, set the
TONE/PULSE Select Switch to the
PULSE position.
C.
If you are not sure which system you
have, set the TONE/PULSE Select Switch
to the TONE position. Press the
button on the
HANDSET
to get a dial
tone, and press any button on the
TELEPHONE KEYPAD except the zero. If
the dial tone continues, it means that you
do not have TONE dialing service. Press
the button on the
HANDSET
to hang
up. Set the TONE/PULSE Select Switch
to the PULSE mode and then try again.
TALK
TALK
12.
Set the date and time on the
HANDSET
. (See page 23 for details.)
13.
Set the date and time on the
BASE UNIT
. (See page 30 for details.)
7.
Install the
HANDSET
BATTERY PACK by plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT.
8.
Place the BATTERY PACK inside the BATTERY COMPARTMENT.
R
USE ONLY WITH CLASS 2 POWER SOURCE
TEL LINE
TS 5R 3R
RING SELECT
RESET
ON OFF
RINGER
ICM ANNC
SELECT
ON OFF
MSSG ALERT
TONE/PULSE
DATA
AC ADAPTOR
TELEPHONE LINE CORD
TELEPHONE
JACK
120V WALL
OUTLET
TONE/PULSE
SELECT SWITCH
POWER-IN
CONNECTION JACK
TELEPHONE LINE
CONNECTION
JACK
BATTERY PACK
BATTERY
COMPARTMENT
COVER
Getting Started
Getting Started
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 16
