1.
Button:
Press and hold down to record memo messages.
2.
Button:
Press to set/check the day and time.
3.
(OUTGOING MESSAGE) Button:
Press and hold down to record OGM messages.
4.
Button:
Press to erase messages.
5. CHARGE TERMINALS:
For charging the
HANDSET
BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
6. SPEAKERPHONE LED Indicator:
Lights up when the
BASE UNIT
speakerphone function
is activated.
7. IN USE/CHARGE LED Indicator:
(IN USE) Lights up to indicate that the
HANDSET
is in
TALK mode. (CHARGE) Lights up when the
HANDSET
is placed on the
BASE UNIT
for
charging.
8. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator:
Lights when the answer
function is turned ON.
9. MICROPHONE
10.
(ANSWER FUNCTION ON/OFF) Button:
Press to activate or deactivate the answer
function.
11.
Button:
Press to PAGE the
HANDSET
. Press again to stop.
12.
Button:
Press and hold to set the 3-digit Remote Access Code for remote operation.
13. MESSAGE ALERT:
Set switch to ON to generate a “beep” sound every 12 seconds when a
new message has been received.
14. ANNOUNCE ONLY/INCOMING MESSAGE Switch:
ICM
- System records the incoming messages.
ANNC
- System plays your announcement and then hangs up without recording messages.
15. RINGER ON/OFF Switch:
Set switch to OFF position to disengage the ringer on the
BASE
UNIT.
16. RING SELECT Switch:
To select the number of rings before the Answering System answers
a call.
3R
- System answers a call after the third ring.
5R
- System answers a call after the fifth ring.
TS (TOLL SAVER)
- System answers after the third ring only if you have new
messages. Otherwise, the system will answer after the fifth ring.
17.
(MAILBOX 1) Button:
Press to activate functions for MAILBOX 1.
MEMO
BASE UNIT Controls
BASE UNIT Controls
18.
(MAILBOX 2) Button:
Press to activate functions for MAILBOX 2.
19.
(MAILBOX 3) Button:
Press to activate functions for MAILBOX 3.
20.
(MAILBOX 4) Button:
Press to activate functions for MAILBOX 4.
21. BASE UNIT ANTENNA
22. MAILBOX LED Indicators:
Lights to indicate the presence of message(s) and blinks to
indicate that the corresponding MAILBOX is active and ready to operate.
23.
Button:
Press to stop playing a message.
24.
(VOLUME UP) Button:
Press repeatedly to increase the speaker volume level of the
BASE UNIT
.
25.
(VOLUME DOWN) Button:
Press repeatedly to decrease the speaker volume level of
the
BASE UNIT
.
26.
Button:
Press to play messages.
27.
Button:
Press to skip messages.
28. LED MESSAGE DISPLAY:
Indicates the number of memos/messages received, status of the
system.
EA - Erasing
01~63 - No. of memos/messages
OP - OGM is playing
Ao - Announce Only FU - Memory is full
PA - Pause
SP - Speakerphone function is being used
29.
Button:
Press to repeat messages.
30.
(SPEAKERPHONE) Button:
Press to answer a call using the
BASE UNIT
.
31. TONE-PULSE SELECT SWITCH
32. RESET Button:
Press and hold down for 2 seconds to reset the system and clear all
recordings.
33. POWER-IN CONNECTION JACK
34. TELEPHONE LINE CONNECTION JACK
TIME
OGM
ERASE
ANS
ON/OFF
PAGE
CODE
1
1
3
4
STOP
VOL+
VOL-
PLAY
SKIP
RPT
SPK
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 8
