USB Cable
Use the USB Cable to insert the micro-USB end into the
port of the Control Ball. It is used for upgrading wired firm-
ware and downloading user-defined programs on PC.
Used for charging.
Disassembly Tool
Instructions of disassembly tool:
Please check for updates and download the latest firmware version to upgrade.
Website: www.bellrobot.com
• Master control firmware upgrade
Light: It will flash green then red. When the upgrade is complete, the light will turn to the default color of
power-on （other colors indicate abnormal downloading）.
• Firmware upgrade of function balls
Light: It will flash red then green. When the upgrade is complete, the light will turn to default color of pow-
er-on （other colors indicate abnormal downloading）.
Attention: please do not cut off the power during upgrading or it may
cause upgrading failures and/or damage the control ball.
Upgrading firmware
Scenario 1:
• Insert the disassembly tool into the gap between the connecting
rod and connecting ball;
• Push inward to detach the connecting rod.
Scenario 2:
• Place and press the handle of the disassembling rod onto the
protruding section of connecting rod S on the bridge;
• Push down on the handle to detach the connecting rod.
22
21
Summary of Contents for Mabot
Page 1: ......
