EN / Bellmarine AC- liquid cooled e-propulsion systems
9
4 OPERATION
4.1
SWITCHING ON AND OFF
The motor is switched on by turning the key clockwise in
the motor switch. The motor switch has three positions:
"off", "maximum" and "economy".
Two power programs are available:
Maximum: the full power of the motor is available.
Economy: the maximum speed of the motor is
reduced, as well as the maximum power.
It is possible to switch between the two
power programs while the motor is running.
Be aware that switching from “Economy” to
“Maximum” will increase the speed of the
motor and that of the boat instantly.
It is possible to remove the key in the "economy" (reduced
power) position for safety reasons.
The system is switched off by turning the key
counterclockwise to the “off” position.
4.2
POWER BOOST
Moving the Joystick / Throttle from neutral to Forward or
Backwards the system will apply an extra 10% power to
the motor for 8 seconds to increase acceleration and
maneuverability.
Every time passing the neutral position of the joystick this
power boost function will be available.
WARNING!
It is possible to switch between the 2 sailing
programs during sailing. Be aware that when
changing from the Eco program to the Max
program that the propeller speed increases
thus the speed of the boat will increase.
4.3
USE OF THE DISPLAY E2 / E4 / E7
After switching on the motor, the display lights up.
Figure 4-1.1: E2 Display
Figure: 4-1.2 E4 Display
Figure: 4-1.3 E7 Display
The E7 display has everything the E4 display has and
more like: It displays the engine/motor controller temp.,
voltage measurement, illuminated screen and a speaker
for a warning by failure.
