Bellini BGT705X Installation & Operation Instructions Download Page 4

Children’s Safety 

The cooking zones will become hot when you cook. Therefore, always keep small children
away from the appliance.

The appliance is not intended for use by young children or infirm persons without
supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Safety During Use 

There is the risk of burns from the appliance if used carelessly.

Cables from electrical appliances must not touch the hot surface of the appliance or hot
cookware.

Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

Switch the cooking zones off after each use.

Users with implanted pacemakers should keep their upper body at least 30 cm from
cooking zones that are switched on.

Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and
saucepan lids on the cooking surface, as they can get hot.

Special conditions, which shall be avoided, e.g., marine environment, and any
conditions necessary to ensure optimum performance.

The appliances can be used in freezing conditions.

Safety Instructions 

Safety When Installation 

DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE.

DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN
OPERATION.

WHERE THIS APPLIANCE IS INSTALLED IN MARINE CRAFT OR CARAVANS, IT
SHALL NOT BE USED AS A SPACE HEATER.

This hotplate must be installed in accordance with:
AS/NZS5601 - Gas Installations (for Australia) 

 current edition

NZS 5261 

 Code of Practice for the Installation of Gas Burning Appliances and

Equipment (for New Zealand) This standard may not be now current!!
Local gas fitting regulations

Summary of Contents for BGT705X


















Reviews: