Bellini BGT705X, Installation & Operation Instructions

Page: 12 / 17

12
ADJUSTING THE BURNER MINIMUM FLAME HEIGHT:
NOTE: This adjustment can only be performed by the installer or an authorized service personnel.
The minimum burner flame is factory adjusted for the gas type stated on the gas type label adjacent to the gas
connection and should not require adjustment. Adjustment may be required if the hotplate has been converted
from Natural gas to Universal LPG or vice versa.
GAS CONVERSION INSTRUCTIONS:
The manufacturers servicing instructions detail how authorized personnel may convert the hotplate from Natural
gas to Universal LPG or from Universal LPG to Natural gas. Contact the manufacturer or agent as required.
For model * BGT705X and all variations of model :
ADJUSTED FOR NATURAL GAS 1.0kPa ADJUSTED FOR ULPG 2.75KPa
NOZZLES
DIAMETER
mm
Gas consumption,
MJ/h
NOZZLES
DIAMETER
mm
Gas consumption,
MJ/h
WOK 1.70 13.0 WOK 0.98 13.0
Rapid 1.40 10.0 Rapid 0.90 10.0
SEMI RAPID 1.10 6.0 SEMI RAPID 0.7 6.3
AUXILIARY 0.90 4.0 AUXILIARY 0.55 4.0
Replacement of the nozzles must be performed by a
qualified person. Once the nozzles have been replaced
this label must be affixed to the name plate of the
appliances.
Replacement of the nozzles must be performed by a
qualified person. Once the nozzles have been
replaced this label must be affixed to the name plate
of the appliances.
Natural Gas regulator is to be fitted and adjusted
Change the NG regulator to LPG by a qualified
person.
Start Using Your Appliance
BGT705X*
Description Explanation
Zone indicators
These show which zone is under control.
Flame power
Flame power of the zones, is the lowest and
is the highest.
The hotplates are fitted with mains powered electronic spark ignitors, so must be connected to mains power
supply (i.e., nominal 220~240 V ac) to operate. If power is not available, the hotplate will still work but the burners
will have to be lit with a match or similar.