manualshive.com logo in svg

Belling FSG54TC, Service Manual, Page: 6 / 81

Share
Download
Belling FSG54TC Service Manual Download Page 6

OUR WARRANTY

Glen Dimplex Australia

Unit 2, 205 Abbotts Road

Dandenong South

Victoria 31 75

Australia

Ph: 1300 556 816

Fx: 1800 058 900

                          

           IMPORTANT NOTICE

Please note the cooling fan fitted to this appliance is an integral part of its 

safety and functionality. When the appliance is installed care must be taken 

that the cooling fans performance is not impeded by any objects coming into 

contact with it. (Installation pipes, leads etc) Care must also be taken that 

there is sufficient air flow at the rear of the appliance for the cooling fan to 

run at its optimum efficiency. (Particularly Built In appliances) See clearance 

dimensions in the installation section of the booklet. During use the Appli-

ance must never be disconnected from the Mains supply as this will seriously 

affect the safety and performance of the appliance, particularly in relation to 

surface temperatures becoming hot and gas operated parts not working ef-

ficiently. The cooling fan is designed to run on after the control knob has been 

switched off to keep the front of the appliance and the controls cool until the 

appliance has naturally cooled itself.

If your appliance is covered by the warranty and guarantee, you will not be 

billed for work undertaken should your appliance be faulty, terms and condi-

tions do apply, so please read through the literature carefully.

Please ensure that you have available your appliances model number and 

serial number, there is a space at the back of this book for recording that 

information.

Glen Dimplex New Zealand Pty

38 Harris Road, East Tamaki

Auckland

New Zealand

Ph: 09 274 8265

Fx: 09 274 8472

Should you need it . . . .

Inside the paperwork which has come with this appliance, there is a leaflet 

and card explaining the terms of our extended warranty and guarantee. In 

order to apply for our five year guarantee, simply fill in the details on the card 

and post it off, this will register your appliance.

Should you wish to take out extended warranty, please fill in the details on the 

leaflet and post this off to:

Summary of Contents for FSG54TC


















































































Reviews:

No comments