Belling FSG54TC, Service Manual, Page: 36 / 81

INSTALLATION INSTRUCTIONS - GAS PRODUCTS
Connect to the electricity supply - Gas
(mains ignition models only)
Warning:
This appliance must be earthed.
The flexible mains lead is supplied
connected to a mains plug which complies
with AS/NZS 3112.
Replace only with a plug of the same type
and rating.
As the colours of the wires in the
mains lead for the appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
1. The wire which is coloured green and
yellow mu st be connected to the terminal
marked E (Earth) or coloured Green.
2. The wire which is coloured blue must
be connected to the terminal marked N
(Neutral), or coloured Black.
3. The wire which is coloured brown must
be connected to the terminal marked L
(Live), or coloured Red.
The plug and socket must be accessible
after installation. Should the mains lead
of the appliance ever require replacing,
this must be carried out by a qualified
electrician who will replace it with a lead
of the same size and temperature rating.
Important: - ensure that you route all
mains and electrical cables and flexible
tubing well clear of any adjacent heat
source.
Under no circumstances should the
mains electric cable be allowed to
come into contact with the vertical
oven flue tubes on the rear of the
appliance.
InstallatIon InstructIons
connect to the electricity supply
(mains ignition models only)
Warning: This appliance must be earthed.
The flexible mains lead is supplied
connected to a BS 1363 fused plug, the
plug is fitted with the correct fuse
Replace only with a fuse of the same
rating and type.
The wires in the mains lead are coloured
in accordance with the following code:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
As the colours of the wires in the mains
lead for the appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1. The wire which is coloured green and
yellow must be connected to the terminal
marked
E (Earth) or coloured Green.
2. The wire which is coloured blue must
be connected to the terminal marked
N
(Neutral), or coloured Black.
3. The wire which is coloured brown must
be connected to the terminal marked
L
(Live), or coloured Red.
The plug and socket must be accessible
after installation. Should the mains lead of
the appliance ever require replacing, we
recommend that this is carried out by a
qualified electrician who will replace it with
a lead of the same size and temperature
rating.
Important: - ensure that you route all
mains and electrical cables and flexible
tubing well clear of any adjacent heat
source.
under no circumstances should the mains
electric cable be allowed to come into contact
with the vertical oven flue tubes on the rear of
the appliance.
Connect to the electricity supply
(mains ignition models only)
Warning:
This appliance must be
earthed.
The flexible mains lead is supplied
connected to a BS 1363 fused plug,
The plug is fitted with the correct fuse
Replace only with a fuse of the same
rating and type
.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
As the colours of the wires in the
mains lead for the appliance may
not correspond with the coloured
markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green
and yellow must be connected to
the terminal marked E (Earth)
or coloured Green.
2. The wire which is coloured blue
must be connected to the terminal
marked N (Neutral), or coloured
Black.
3. The wire which is coloured brown
must be connected to the terminal
marked L (Live), or coloured Red.
The plug and socket must be
accessible after installation.
Should the mains lead of the
appliance ever require replacing, we
recommend that this is carried out by
a qualified electrician who will
replace it with a lead of the same size
and temperature rating.
Important: - ensure that you route
all mains and electrical cables and
flexible tubing well clear of any
adjacent heat source.
Under no circumstances should the mains
electric cable be allowed to come into contact
with the vertical oven flue tubes on the rear of
the appliance.
21
� �������
����� � ������
� ������
�����
� ���������
����
Installation Instructions
Connect to the electricity supply
(mains ignition models only)
Warning:
This appliance must be
earthed.
The flexible mains lead is supplied
connected to a BS 1363 fused plug,
The plug is fitted with the correct fuse
Replace only with a fuse of the same
rating and type
.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
As the colours of the wires in the
mains lead for the appliance may
not correspond with the coloured
markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green
and yellow must be connected to
the terminal marked E (Earth)
or coloured Green.
2. The wire which is coloured blue
must be connected to the terminal
marked N (Neutral), or coloured
Black.
3. The wire which is coloured brown
must be connected to the terminal
marked L (Live), or coloured Red.
The plug and socket must be
accessible after installation.
Should the mains lead of the
appliance ever require replacing, we
recommend that this is carried out by
a qualified electrician who will
replace it with a lead of the same size
and temperature rating.
Important: - ensure that you route
all mains and electrical cables and
flexible tubing well clear of any
adjacent heat source.
Under no circumstances should the mains
electric cable be allowed to come into contact
with the vertical oven flue tubes on the rear of
the appliance.
21
� �������
����� � ������
� ������
�����
� ���������
����
Installation Instructions
The wires in the mains lead are coloured
in accordance with the following code:
Green and yellow = Earth,
Blue = Neutral,
Brown =
Live.
WIRING SIDE OF THE PLUG