Belling FSG54TC, Service Manual, Page: 27 / 81

USING THE PROGRAMMER/CLOCK - GAS (if fitted)
The programmer buttons
The ‘function’ button in the centre is used
for setting the minute minder and setting
up the automatic cooking. See below for
details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ between the hours
and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button
to listen to the first tone. Release the
button and press it again to listen to the
second tone, etc. Releasing the button
after the tone has sounded will
automatically select that tone.
Setting the minute minder
Press and release the function button.
The minute minder bell symbol will
appear and flash on the display. Use
the plus and minus buttons to set the
required alarm time. After setting, the
display will revert to show the time of
day and the bell symbol will stop flashing.
Pressing the function button will display
the minutes remaining. If the time has
counted down to the last minute, the
remaining seconds are shown. The tone
will sound at the end of the time set.
To cancel the tone, press the function
button.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Progra mmer/ Clock (iffitted)
Theprogrammer buttons
minus
plus
The‘functi on’button inthe centreis
usedfor settingthe minuteminder and
settingup theautomati ccooking. See
below fordetails.
Toset thetime ofday
When thepower isturne don tothe
appliance,the timeof daystarts from
0.00.
Pressand releasethe (minus)and
(plus) buttonssimultaneo usly.Set the
timeof day,eg 2.00with the and
buttonswhile the‘dot’ beweenthe
hoursand minutesis flashing.
Toselect analarm tone
Pressand holdthe (minus)button to
listento thefirst tone.Relea sethe
buttonand pressit againto listento
theseco ndtone, etc. Releasingthe
buttonafter theton ehas sounded
willautom atically selectthat tone.
17
Programmer / Clock (if fitted)
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the (minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
17
Progra mmer/ Clock (iffitted)
Theprogrammer buttons
minus
plus
The‘functi on’button inthe centreis
usedfor settingthe minuteminder and
settingup theautomati ccooking. See
below fordetails.
Toset thetime ofday
When thepower isturne don tothe
appliance,the timeof daystarts from
0.00.
Pressand releasethe (minus)and
(plus) buttonssimultaneo usly.Set the
timeof day,eg 2.00with the and
buttonswhile the‘dot’ beweenthe
hoursand minutesis flashing.
Toselect analarm tone
Pressand holdthe (minus)button to
listento thefirst tone.Relea sethe
buttonand pressit againto listento
theseco ndtone, etc. Releasingthe
buttonafter theton ehas sounded
willautom atically selectthat tone.