Belling Design BDC95IN2F, Instruction Manual, Page: 22 / 28

When you have installed the hob, make sure that
•
The power supply cable is not accessible through cupboard doors or drawers.
• There is adequate flow of air from outside the cabinetry to the base of the hob.
• If the hob is installed above a drawer or cupboard space, a thermal protection
barrier is installed below the base of the hob.
• The isolating switch is easily accessible by the customer.
Warning!
• If the cable is damaged or needs replacing, this must be done by the
manufacturer or suitably qualified person.
• The installer must ensure that the correct electrical connection has
been made and that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must not be accessible after installation
Ceramic Hob BDC95I
N
2
F
Cooking Zones 5 Zones
Supply Voltage 220-240V~ 50-60Hz
Installed Electric Power
10
400W
Product Size D×W×H(mm)
88
0×520×55
Building-in Dimensions A×B (mm)
810
×490
22
Caution! Be careful that the cables are correctly engaged and tightened.
We cannot be held responsible for any incident resulting from incorrect connection or
which could arise from the use of an appliance which has not been earthed or has been
equipped with a faulty earth connection.