18
4)
Remove your fingers from the touch control, then push again on touch [ 0/I ] during
few seconds, until blinking [ E ] symbols appear.
5)
Wait until [ E ] symbols stop blinking.
6)
After few seconds, [ E ] are automatically transformed in [ C ]. The existing setup
has been cancelled.
VI)
Second step : new setup
1)
Take a ferromagnetical pot with a minimum diameter of 16 cm
2)
Select a cooking zone by pushing on the corresponding [ C ] display
3)
Place the pot on the area to be set
4)
Wait until the [ C ] display becomes a [ - ]. The selected cooking zone is now
configured.
5)
Follow the same procedure for each cooking zone with a [ C ] display.
6)
All the cooking zones are configured once all the displays are turned off.
Please use the same pot for the whole procedure.
Never put several pots together on the zones during
•
the setup-process.
If [ E 4 ] displaying remains, please call customer care
The control panel displays [
U
•
]:
•
There is no pan on the cooking zone.
•
The pan is not compatible with induction.
The bottom diameter of the pan is too small.
•
The control panel displays [ E ]:
•
The electronic system is defective.
•
Disconnect and replug the hob.
Call after sales service
•
One or all cooking zone cut-off:
•
The safety system functioned.
The cooking zone was not turned off after an extended period of
•
time.
One or more touch
•
keys are covered.
•
The pan is empty and its bottom overheated.
The hob also has an automatic reduction of Booster level and breaking Automatic
overheating
•
Continuous ventilation after cutting off the hob:
•
This is not a failure, the fan continuous to protect the electronic device.
The fan cooling stops automatically.
•
The automatic cooking system doesn’t start-up:
•
The cooking zone is still hot [ H ].
The highest Booster level is set [ 9 ].
•
The control panel displays [ U ]:
Refer to the chapter “Keep warm“.
•
The control panel displays [ II ]:
Refer to the chapter “Pause“
The control panel displays [ ] or [ Er03 ] :
•
An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ E2 ] or [ E H ] :
•
The hob is overheated, let it cool and then turn it onagain.
The control panel displays [ E3 ] :
•
The pan is not adapted, change the pan.
Summary of Contents for Design BDC95IN2F
Page 2: ......