Belling Design BDC95IN2F, Instruction Manual, Page: 12 / 28

12
•
Start up / Stop Double Booster
Action Control panel Display
Start up the Booster Slide to the end of the “SLIDER” [ P ]
Or press directly on the end of
the “SLIDER”
Start up Double Booster Re-press key [ P ] [ and P ]
Stop the Double Booster Slide on the “SLIDER“ [ P ] to [ 0 ]
Stop Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
Timer
The timer is able to be used simultaneous
ly
with all heating zones and with different time settings
(from 0 to 1H59 minutes) for each heating zone.
•
Setting and modification of the cooking time:
Action Control panel Display
Press a zone [ 0 ]
slide on the “SLIDER“ [ 1 ] to [ P ]
Press key [ ] Timer display on
Press key [ - ] from the timer [ 60 ] to 59, 58...
Press key [ + ] from the timer Time increase
Select a zone
Select the power level
Select the
Timer
Decrease the time
Increase the time
After a few seconds, the [ ] display stops with blinking.
The time is confirmed and the timer starts.
•
To stop the cooking time:
Action Control panel Display
Select the Timer Press key [ ] Timer display on
Stop the time Press key [ - ] from the timer [ 000 ]
If several timers are activated, repeat the process.
•
Egg timer function:
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Action Control panel Display
Activate the hob Press key [ ] for 2 sec. [ 0 ]
Select the Timer Press [ 000 ] [ 000 ]
Decrease the time Press key [ - ] from the timer [ 60 ] to 59, 58...
Increase the time Press key [ + ] from the timer Time increase
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].