Installation
Ventilation - Ventilation must be in accordance with AS/NZS5601-
Gas Installations. In general, the appliance should have adequate
ventilation for complete combustion of gas, proper flueing and to
maintain temperature of immediate surroundings within safe limits.
Before any procedure, it is important to check that the appliance is
DISCONNECTED from the electrical mains. The Manufacturer
declines all responsibility for any damage deriving from
installations in breach of the regulations in force or from failure to
comply with these installation instructions.
W
arning
For 90cm models - When installed above a cupboard or drawer, a
protective shelf / shield must be installed a minimum of 10mm below
the cooktop to insure the base of the cooktop cannot be accidentally
touched when hot. The shield does not need to be a non-
combustible material.
Material such as timber or melamine can be used. The shield needs
to be easily removable for servicing of the appliance. A small gap
(10-20mm) should be left at the front and rear to allow sufficient
ventilation to the cooktop.
220-
220-240V/50-
YWWXXXXX
BGH604WSS
30.6MJ/h
30.6MJ/h
220-
220-240V/50-
YWWXXXXX
BGH604WBG
30.6MJ/h
30.6MJ/h
