Routine maintenance
Have the condition and efficiency of the gas pipe and the pressure
regulator (if installed) checked periodically. If anomalies are found,
do not repair components but have the faulty component replaced.
To ensure good performance and safety, the gas regulator taps
must be greased periodically.
Periodic lubrication of the taps and any other appliance service
must only be carried out by Authorised Personnel.
Abnormal operation
Any of the following are considered to be abnormal operation and
may require servicing:
·
Yellow tipping of the burner flame.
·
Sooting up of cooking utensils.
·
Burners not igniting properly.
·
Burners failing to remain alight.
·
Burners extinguished by cupboard doors.
·
Gas valves, which are difficult to turn.
Please read the troubleshooting tips on page 25 before contacting
Belling
.
Service and parts
Before leaving the factory, this appliance was tested and adjusted
by specialist skilled staff to give the best operating results. Any
subsequent necessary repairs or adjustments must be carried out
with the greatest care and attention by authorised personnel. For
this reason, we strongly advise you contact the
Belling
Service
Center, specifying the nature of the problem, the model of the
equipment and the serial number. This data is provided on the
data label adhered to the base of the appliance and on the
duplicate data label. Always use original
Belling
spare parts.
Warranty
Your new appliance is covered by a warranty. The details of your
warranty conditions are on your Warranty Card supplied with the
appliance. Keep the physical receipt which documents your
purchase of the appliance and purchase date as you will need to
show this for any Warranty repairs. Warranty cannot be claimed
without proof of purchase. When the appliance has been provided
by a builder, the certificate of occupancy is acceptable as proof of
purchase.
14
Use and Care
