background image

MANUFACTURER GUARANTEE 

This warranty is provided in Australia by Glen Dimplex Australia Pty Limited ABN 69 118 275 460  

(Phone number 1300 556 816)

 and in New Zealand by Glen Dimplex New Zealand Limited NZBN 

9429000069823  

(Phone number 09 274 8265) 

in respect of the 

Belling Design 

product. 

 

1. Belling Design Express Warranty

 

 

 

 

 

 

 

Subject to the

 

exclusions below, we warrant that the product will not have any electrical or

 

mechanical breakdowns within:

a)

 

In the case of

 

Belling Design

 

products used for personal, domestic or household purposes,

a period of

 

5

 

years

 

from the date the product is purchased as a

 

brand-

 

new

 

product from a 

retailer located in Australia

 

/ New Zealand.

b) In the case of 

Belling Design 

products used for purposes other than personal, domestic or

household purposes (including business or commercial use), a period of 90 days from the
date the product is purchased as a brand-new product from a retailer located in Australia /
New Zealand. 

Belling Design 

products are designed and intended for domestic use only;

and

c) All warranty repairs must be carried out by Glen Dimplex or their nominated service agent

Note: warranty periods detailed above may vary in line with agreements with select retail and 
builder partners and may differ between Australia and New Zealand. 

The benefits conferred by this express warranty are in addition to the Consumer Guarantees 
referred to in section 3 and any other statutory rights you may have under the Australian / New 
Zealand Consumer Law and/or other applicable laws. 

2. Warranty exclusions

This express warranty does not apply where: 

a) The product has been installed, used or operated otherwise than in accordance with the

product manual or other similar documentation provided to you with the product;

Summary of Contents for BDC604S





















Reviews: