BELLEDS Technologies. ---- Q Station User Guide
- 11 -
2.2.2 Basic Settings
In this function, you can change the
Q Station Wi-Fi SSID
.
Also, you can set the encryption mode and password for the Wi-Fi.
Notice:
By default
, Q Station SSID is
“bellnetXXXXXX”
. No Encryption.
(XXXXXX is the last 6 digit of your MAC)
Click
“Basic Settings”
, to enter the management page
(Figure 2-8).
Click
“Back”
, to go back to Q Station configuration main page
(Figure 2-2).
Figure 2-8 Basic Settings screen
Currently: The Wi-Fi SSID is bellnetA07FA2. Encryption Mode is NONE (no encryption).
You can change the Device Name (Known as Wi-Fi SSID):
1.
I
nput the Device Name
which you want in the field.
(Figure 2-9)
2.
Click “Done”
(Figure 2-10)
, after
20
seconds, it will pop-up a window
(Figure 2-11)
:
Please refresh the page or reconnect your device.
3.
Click “OK”,
then the Device Name has been changed successfully.
(Figure 2-12)
Notice:
After you changed the Device Name (Q Station SSID in Wi-Fi), you need to
connect to your new Q Station SSID again in Wi-Fi.
