9
Troubleshooting Guide
GB
Problem
Cause
Remedy
Engine will not start.
No fuel.
Open fuel tap.
Fill fuel tank.
Engine switched off.
Switch engine on.
Spark plug fouled.
Clean and reset plug gap.
Engine cold.
Close choke.
Engine
fl ooded.
Open choke, fully open throttle, pull recoil starter until engine fi res.
Engine still will not start
Major Fault.
Contact Agent or Belle Group.
Unit will not vibrate.
Belt tension incorrect.
Adjust belt tension.
Belt Broken.
Replace Belt.
Excentric shaft damaged / Broken.
Replace excentric shaft.
Engine running but beams Incorrectly attached to beams.
Re-attach to beams correctly.
not vibrating.
Your new Belle Group Porto Screed is warranted to the original purchaser for a period of one-year (12 months) from the original date
of purchase. The Belle Group warranty is against defects in design, materials and workmanship.
The following are not covered under the Belle Group warranty:
1. Damage caused by abuse, misuse, dropping or other similar damage caused by or as a result of failure to follow assembly,
operation or user maintenance instructions.
2. Alterations, additions or repairs carried out by persons other than Belle Group or their recognized agents.
3. Transportation or shipment costs to and from Belle Group or their recognized agents, for repair or assessment against a warranty
claim, on any machine.
4. Materials and/or labor costs to renew, repair or replace components due to fair wear and tear.
The following components are not covered by warranty.
·
Drivebelt/s
· Engine air fi lter
· Engine spark plug
Belle Group and/or their recognized agents, directors, employees or insurers will not be held liable for consequential or other
damages, losses or expenses in connection with or by reason of or the inability to use the machine for any purpose.
Warranty Claims
All warranty claims should fi rstly be directed to Belle Group, either by telephone, by Fax, by Email, or in writing.
For warranty claims:
Tel: +44(0) 1538 380000
Fax: +44(0) 1538 380038
Email : [email protected]
Write to:
Belle Group Warranty Department,
Unit 5 Bode Business Park
Ball Haye Green,
Leek,
Staffordshire,
ST13 8BW.
England.
Warranty
GB
