Belle Group BHT 315, Original Instructions Manual

Page: 13 / 182

11
You may not start to operate the machine until
you have read this instruction manual, observed
all the instructions given and installed the machine as
described!
Keep the instructions in a safe place for future use.
Contents
Extent of delivery 11
Characteristic noise values 11
Operating times 11
Symbols on the machine 11
Symbols of the instructions manual 11
Proper use 12
Residual risks 12
Safety instructions 12
Preparing for startup 14
Start-up 14
Working with the saw
15
Maintenance and cleaning 16
−
Exchange of saw blade 16
Transport 17
Storage 17
Possible faults
18
Technical data 18
Guarantee 19
EC Declaration of Conformity
177
Manufacturer proof 180
Spare part list (Assembly instructions)
Extent of delivery
•
Circular Saw Bench (unmounted)
•
Fastener bag
•
Accessories bag
•
Accessories bag for sticker
•
Assembly accessories for saw blade change
•
Original instructions
•
Assembly instructions
•
Pushstick
Please refer to the enclosed assembly instructions for a detailed
list of the extent of delivery.
After unpacking, check the contents of the box for
¾
completeness
¾
possible transport damage.
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Characteristic noise values
Application of the machine as table saw with standard saw blade.
The factor of measurement uncertainty is K = 4 dB.
Sound power level according DIN EN ISO 3746
Sound power level Guaranteed sound power
level
No-load L
WA
= 80.6 dB(A)
L
WA
= 105 dB(A)
Load L
WA
= 104.6 dB(A)
Sound pressure level at the workplace
according DIN EN ISO 11202
No-load L
PA
= 80.5 dB(A)
Load L
PA
= 90.9 dB(A)
The values given are emission values and must therefore not simultaneously
represent safe workplace values too. Although there is a relationship between
emission and immersion levels, it can be reliably deduced whether additional
precautionary measures are necessary or not. Factors, which can influence the
immision level currently existing at the workplace include the duration of the
effects, the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible workplace
values can also vary from country to country. This information should however
enable carrying out an improved assessment of the danger and risk.
Operating times
Please observe as well the regional regulations for noise
protection.
Symbols of the machine
Protective guard, splitting
wedge and saw blade o.k.?
Stoppers ready for running
and push stick ready to hand?
Working place tidied?
Carefully read the instructions manual and the
safety instructions before starting the machine
and observe the instructions when operating.
Wear ear
protection! Cutting depth
adjustment
Electrical devices do not go into the domestic rubbish.
Give devices, accessories and packaging to an
ecofriendly recycling.
According to the European Directive 2002/96/EC on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility
for environmentally compatible recycling.
This product complies with European regulations
specifically applicable to it.
Symbols of the instructions manual
Potential hazard or hazardous situation. Failure to
observe these instructions may lead to injuries or cause
damage to property.
L Important information on proper handling. Failure to
observe these instructions may lead to malfunction.