Bellcome advanced 2 families, User Manual

Page: 34 / 104

MAINTENANCE
9
The Outdoor panels must be kept away from corrosive substances, lime or mechanical shocks.
The Terminals must be kept away from water, or any other liquids, mechanical shocks, fumes,
dusts etc.
The components of the system can be cleaned with a piece of soft, cotton cloth.
The optional accumulator connected with the Supply control unit will be replaced after the
expiry of its life span. The Supply control unit ensures the accumulator's charging, as long as
the accumulator is not defect. The state of the accumulator is indicated by the signals of the
LED S1 and the acoustic warning in case of a defect.
WARRANTY 10
A three year warranty is granted, from the purchase date, on the basis of the proof of purchase
and if the system was used according to the technical manual.
NO WARRANTY IS GRANTED for: inappropriate installation and use, deliberate
damaging, theft, arson, natural disasters, unauthorized interventions to the
system, the lack of protection of the system's components in case of renovation
activities in the building.
The BELLCOME video systems for residential buildings are produced in compliance with the EU
standards and bear the CE conformity marking.
AUTHORIZED REPRESENTATIVE of ELECTRA S.R.L.
11
ELECTRA Building Communications GmbH
Parkring 10, Liebenberggasse 7 | 1010 Wien – Austria
Phone +43 1 516 33 – 3817 | Fax + 43 1 516 33 – 3000
office@electra-automation.at
Designed and Manufactured by ELECTRA
Made in EU
Step
3
PROG
Press PROG .
The red LED is off, programming procedure is terminated.
Any error during programming is signaled with [ ] .
BEEEEEP
In this case, the procedure must be recommenced from Step 2 .
Supply control unit
8.4 Deleting all the programmed tags
Use this procedure only if you lost one or more of your tags . The remaining ones must be programmed
again.
Key Outdoor panel
Long press the key [ . The Panel enters programming .
BEEEEEP
]
7 short touches 2 x [
BEEP
].
Immediately one long press the tags are deleted.