SECTION
573-127-703
3.
VARIABLE FEATURES
3.01
Tight-Tape and Tape Shoe Mechanism
(A) TIGHT-TAPE SWITCH
To Check
Place control lever in
position.
Requirement
9/32
inch---Max
13/32
inch
to open contacts when tight-tape arm
is raised.
To Adjust
Loosen clampscrew. Using adjusting
slot, position tight-tape intermediate
arm to meet this requirement. Re
tighten clampscrew.
(
Rear View}
POINTS
ARM
CLAMPSCREW
TIGHT-TAPE
SWITCH CONTACTS
(B) TORSION SPRING
Requirement
Min
2-1/2
oz
to lift tape shoe.
(C) TAPE SHOE
To Check
Latch tape lid in position. Check
clearance between tape guideplate and
tape shoe.
Requirement
TAPE
Min
0.005
inch---Max
0.008
inch
To Adjust
Loosen locknut. Rotate adjusting scre w
to meet the requirement. Retighten
locknut.
Page
34
(Rear View)
ADJUSTING SCREW
LOCKNUT
...
