Bell System BL106 User Manual Download Page 6

Page: 6 / 48

CS106/BL106 Combined Door Entry and Coded Access

General Description

The C106 Coded Access Controller is a high quality, versatile security product,

controlling access to a door by means of a keypad and an electric lock release

mechanism.

Basic Operation

The C106 Keypad may be programmed with up to 10 unique access codes. If

a valid code is entered on the keypad, the lock release will operate for a preset

duration.

The keypad has one green and one red LED to indicate the system status to the

user; the green LED indicates that the lock release is operating, whilst the red

LED indicates an invalid entry.

Other Features:

Multiple codes

The C106 has 10 access codes available each of which can be 1 to 8 digits long.

The extra codes are provided for a variety of possible uses:-

•

Multi-user applications, e.g. for a small office block.

•

Time-restricted access (described below).

Time-Restricted Access (Staff/Executive Operation)

Any of the 10 access codes may be programmed to operate during a restricted

Summary of Contents for BL106

















































Search results

Summary of Contents for BL106

Reviews:

Related manuals for BL106

Brands by name

Popular brands

Bell System BL106, User Manual

Search results

Summary of Contents for BL106

Reviews:

Related manuals for BL106

Brands by name

Popular brands