www.bbhscanners.com
68 of 142
4. If the Detect Double Feed function operates incorrectly, adjust the sensitivity level by
selecting one of the levels in the
Sensitivity
drop-down list.
5. Select one of the following from the
Action
drop-down list:
If a Multifeed occurs, remove the document from the ADF (Automatic Document Feeder). For instructions
on removing papers jams, refer to
“Clearing Paper Jams in the ADF” on page 58
. Either separate the
multifed pages and/or reinsert the document(s) into the ADF and press the STOP/START button to resume
scanning.
High
Select this when feeding thin documents.
Normal
This is the standard sensitivity.
Low
Select this when feeding thick documents.
Beep
Signal alert
Stop Scanning
Stops the scanning process for operator attention. This
is the default setting.
