www.bbhscanners.com
56 of 142
When scanning documents that are longer than the feeder tray, you can pull out the feeder
extension tray, which is located near the edge of the feeder tray. The extension tray will support
documents up to 15 inches (381 mm) long.
To handle longer paper in the exit tray, extend the exit stopper. Adjust the position of the exit
stopper so that it will accommodate the length of the documents. The exit stopper is adjustable to
17 inches (432 mm). When scanning a document longer than 17 inches (432 mm) or A3 size (420
mm), fold down the exit stopper so that the longer paper will fit in the exit tray.
Load the documents on the feeder tray with the side to be scanned facing up. Note the directional
“Face Up” icon and the document sizing scale on the ADF door. Slowly push the sheets in the
direction of the arrow until they stop.
To scan in portrait mode, load the documents with the top edge going first into the feeder. To scan
in landscape mode, load the documents with the left edge going first into the feeder, as shown in
the following diagrams.
5
Feeder tray
Exit stopper
Feeder extension tray
6
