69
N+ Wireless Modem Router
sections
table of contents
1
2
3
4
5
6
8
9
10
MaNUally CoNfIgURINg NeTWoRK seTTINgs
7
Set up the computer that is connected to the cable or DSL modem
FIRST using these steps . You can also use these steps to add
computers to your Router after the Router has been set up to connect
to the Internet .
Manually Configuring Network settings in Mac os up to 9 .x
1 .
Pull down the Apple menu . Select “Control Panels” and select
“TCP/IP” .
2 .
You will see the TCP/IP control panel . Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu
(1)
.
3 .
Next to “Configure”
(2)
, if “Manually” is selected, your Router will
need to be set up for a static IP connection type . Write the address
information in the table below . You will need to enter this information
into the Router .
(1)
(2)
4 .
If not already set, at “Configure:”, choose “Using DHCP Server” .
This will tell the computer to obtain an IP address from the Router .
5 .
Close the window . If you made any changes, the following window will
appear . Click “Save” .
Restart the computer . When the computer restarts, your network
settings are now configured for use with the Router .
