13
N+ Wireless Modem Router
sections
table of contents
1
2
4
5
6
7
8
9
10
3
KNoWINg yoUR RoUTeR
i . Resetting the Router
Push and release the “Reset” button . The lights on the Router
will momentarily flash . The “Power/Ready” light will begin to
blink . When the “Power/Ready” light becomes solid again, the
reset is complete .
ii . Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds, then
release it . The lights on the Router will momentarily flash . The
“Power/Ready” light will begin to blink . When the “Power/Ready”
light becomes solid again, the restore is complete .
13 . Connections to Wired Computers – yellow
Connect your wired (non-wireless) computers to these ports . These
ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for
standard UTP category 5 or 6 Ethernet cable . The ports are labeled 1
through 4, with onboard LEDs on the connectors .
14 . Usb Port
Plug in your USB storage device here .
15 . Connection to adsl – gray
This port is for connection to your ADSL . Connect your ADSL to this
port . An RJ11 telephone cord is provided in the package .
11 . Power Jack – black
Connect the included 12V/1 .25A DC power supply to this jack .
12 . Reset button
The “Reset” button is used in rare cases when the Router may
function improperly . Resetting the Router will restore the Router’s
normal operation while maintaining the programmed settings . You can
also restore the factory default settings by using the “Reset” button .
Use the restore option in instances where you may have forgotten your
custom password .
11
12
14
15
13
