Belkin F8Z182, User Manual

Page: 5 / 72

Manually Selecting an FM Frequency
If you want to use a specific frequency, you can manually select it on your TuneCast Auto.
1. Tune your stereo to a frequency between stations. The ideal frequency is one not
broadcasting a radio station’s signal
2. Press the
+
or
-
button on your TuneCast Auto to select the same frequency.
Storing and Selecting a Frequency
You can store two frequencies using the “m1” and “m2” buttons.
1.
To store a frequency, select the desired frequency on your TuneCast Auto using the
+
or
-
buttons.
2. Press and hold the “m1” or “m2” preset button for two seconds.
The “m1” or “m2” icon will flash on the screen and you will hear a beep when the
frequency is set.
3.
To recall a preset frequency, press the “m1” or “m2” preset button. Your TuneCast Auto
will change to the preset frequency.
Selecting an FM Frequency
1. Find a frequency without a station on it.
A good frequency will be between other
stations, with a lot of static.
2. Match station using the (+)
and (-) buttons.
Selecting an FM Frequency | EN-3
P75616ea_F8Z182eaBLK_TuneCast_mnl.indb 3 14/01/2008 16:46:07