Belkin F8Z182, User Manual

Page: 6 / 72

Using the PRO Setting to Improve Performance
When you connect your iPod, your TuneCast Auto will automatically detect the iPod model
and adjust the volume. Although the default volume setting will be ideal for most conditions,
you may be able to improve the audio performance of your TuneCast Auto by using the
PRO setting. The PRO setting can make your music sound louder and fuller by decreasing
the amount of attenuation in the audio signal. Professional FM stations use dynamic
compression to make music louder and fuller while limiting distortion. You can use the three
PRO settings on your TuneCast Auto to add dynamic compression to your audio:
Normal – No change to the audio. This setting works well with all types of audio.
PRO 1 – Increases the average volume of the audio. This setting works well with most types
of music.
PRO 2 – Increases the average volume even further. This setting works well with quieter
music, but it may cause distortion with louder music.
– Increases the average volume and transmits in mono (instead of stereo). This
setting works well for podcasts and audio books. It can also be used to improve reception if
you are not receiving a clear signal from your TuneCast Auto.
When you press the “PRO” button, your TuneCast Auto will display the current PRO setting.
Pressing the “PRO” button again will change the setting to PRO1, PRO2, and
as follows:
Using the TuneCast Auto
Using the TuneCast Auto
| EN-4
P75616ea_F8Z182eaBLK_TuneCast_mnl.indb 4 14/01/2008 16:46:07