Belkin F5D8630 User Manual Download

Page: 90 / 92

Information

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications to

this device that are not expressly approved by Belkin Corporation may void

the user’s authority to operate the equipment.

Canada-Industry Canada (IC)

The wireless radio of this device complies with RSS 139 & RSS 210 Industry

Canada. This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.

Europe-European Union Notice

Radio products with the CE 0682 or CE alert marking

comply with the R&TTE Directive (1995/5/EC) issued by the

Commission of the European Community.

Compliance with this directive implies conformity to the following European

Norms (in brackets are the equivalent international standards).
• EN 60950 (IEC60950) – Product Safety

• EN 300 328 Technical requirement for radio equipment

• ETS 300 826 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label

on your Belkin product.

Products with the CE marking comply with the EMC Directive (89/336/EEC)

and the Low Voltage Directive (72/23/EEC) issued by the Commission of the

European Community. Compliance with these directives implies conformity

to the following European Norms (in brackets are the equivalent international

standards).
• EN 55022 (CISPR 22) – Electromagnetic Interference

• EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity

• EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics

• EN 61000-3-3 (IEC610000) – Power Line Flicker

• EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled with CE 0682

or CE alert marking and may also carry the CE logo.

Summary of Contents for F5D8630





























































































Search results

Summary of Contents for F5D8630

Reviews:

Related manuals for F5D8630

Brands by name

Popular brands

Belkin F5D8630, User Manual

Search results

Summary of Contents for F5D8630

Reviews:

Related manuals for F5D8630

Brands by name

Popular brands