39
OmniViewIP 5216K/5232K
sections
table of contents
1
2
3
5
6
4
ReMOTe aCCess
Globe icon menu features
Right-click the globe icon and a menu appears. From this menu you
can access the connected devices. You also have the following features:
disconnect
– You can disconnect the session by clicking “Disconnect”.
about
– Click “About to verify the Client, Firmware and Switch” file
versions installed on your Switch.
local settings
– Click “Local settings” and the “Client Configuration”
dialog box appears (see Figure 35).
Hide Toolbar
– Check this option to hide the toolbar from the next
reconnection onward. To toggle the toolbar on and off, press “F9” or
double-click the system tray icon .
full-screen Mode
– Check this option to make the remote session
screen appear in full-screen mode from the next reconnection onward.
To toggle the full-screen mode on and off, press “F11” (also see the
next section).
Virtual Media
– Click this option to mount virtually any removable mass
storage devices connected to the client computer onto the target server.
Figure 35 Client Configuration dialog box
Pointer Type
– From the drop-down menu, you can change the client
computer mouse pointer to appear as a dot or to not appear at all.
