18
Using the Bitronics Software
(continued)
Then if you wish to print to the second printer, let’s say a LaserJet
™
for
example, all you have to do is select that particular printer in the Print dialog
box. Click “OK”, and the print job is automatically sent to the LaserJet
™
printer on Port A of the Bitronics switch.
All you have to do is pick your printer, and the software does everything else.
But remember, ALL THE SETTINGS MUST BE CORRECT, otherwise you may
print garbage out of the wrong printer!
Below, the user has chosen the LaserJet
™
printer. Here, this printer is
connected to Port A of the AutoSwitch. When the print job is sent, the
Bitronics software tells the Bitronics switch to switch to Port A, then lets the
print job go through to the LaserJet
™
.
P73121/F1U126-KIT/EU/man.qxd 4/28/00 1:06 PM Page 18
Summary of Contents for Bitronics AutoSwitch F1U126
Page 1: ......
Page 3: ......
Page 4: ...Table of Contents En Fr De Ne It English 1 Fran ais 29 Deutsche 59 Nederlands 89 Italiano 119...
Page 5: ......
