2.4
Making an internal call using On-hook dialling
1 1 : 2 5 E x t n 1 4
1
1 8
Note
: If the direct line seize feature is enabled for the extension, then the system will attempt to
seize an available line as soon as the user initiates the call. Therefore using on-hook dialling to make
an internal call is not recommended in this case.
E x t n 1 8
0 0 : 0 0 : 0 4
2.5
Making an external call using the Line access code
1 1 : 2 5 E x t n 1 4
_
1 1 9
1 1 9 1
S p e a k i n g
C l o c k
0 0 : 0 0 : 0 4
With the telephone idle, lift the handset or press
the
SPEAKER
key.
Internal dial tone will be heard and the display
will show the dialling prompt.
•
Dial the line access code
. External
dial
tone will be heard.
•
Dial the number – the digits will appear on
the right of the display as they are dialled.
•
Once the digits are dialled to line, they left
justify on the display. If the number has
been already programmed as an address
book entry then the name of that entry will
appear.
When the call is answered the display shows the
called party for approximately 3 seconds before
it starts to display the duration of the call.
The call can be ended at any time by:
•
Replacing the handset or
•
Pressing the
SPEAKER
key.
With the telephone idle, simply dial the extension
or group number from the keypad.
The digits dialled will be displayed starting from
the right hand side of the display. To delete the
last digit dialled the user can simply press the
MUTE
key.
To initiate the call
pick up the
handset
or press the
SPEAKER
key.
The display shows the number of the extension
that is being rung. When the call is answered
the display shows the extension that answered
the call for approximately 3 seconds before it
starts to display the duration of the call.
The call can be ended at any time by:
•
Replacing the handset or
•
Pressing the
SPEAKER
key.
Summary of Contents for Forum Phone 315
Page 1: ...Forum Phone 315 User Guide...
