43
Terminal Functions
Setting the PIN
Some settings on your terminal are protected by a PIN (personal
identification number), providing you have set up a PIN using
the procedure below.
Press the
Menu
softkey.
Using the arrow keys, call up the
Trminal
function on the dis-
play and then press the corresponding softkey.
Select the
NewPIN
softkey.
First enter the old PIN, then the new PIN.
Confirm the entry by re-entering the new PIN, which is then
saved.
The PIN always consists of four digits. When entering a PIN you
do not have to confirm it with the
OK
or a similar softkey. When
the fourth digit is entered your Forum Phone 510 automatically
adopts the PIN. If the newly entered PIN and the confirmation of
the new PIN do not match you will see an error message. In this
case the old PIN remains active.
The factory setting is 0000. This means that a PIN entry is not
requested for any setting change. If you want to remove an
existing PIN, enter and confirm 0000 as the new PIN. The PIN is
then deactivated.
