42
Terminal Functions
Setting the Call Charge Factor
Your Forum Phone 510 stores the connection charges incurred
for the terminal. It also receives details from the network about
the call charge units incurred.* The following programming is
used to set the cost of a unit:
Press the
Menu
softkey.
Using the arrow keys, call the
Trminal
function up on the dis-
play and then press the corresponding softkey.
Select the
Charge
softkey.
Enter your PIN if required. Press the
Factor
softkey for the call
charge factor.
Enter the amount per unit to be used for conversion and press
the
OK
softkey. If you delete the call charge factor with the
≤
arrow key (left), the units are displayed.
* Some network operators make a charge for transmitting call charge infor-
mation, which is an additional service..
The call charge factor is a currency amount you must enter (in
euros and cents). The decimal point is entered using the
‘
key.
A maximum amount of 600.00 can be entered.
