28
Tofino Xenon Security Appliance Tofino SA
Release 06 09/2018
1.9
Management interfaces
1.9.1
V.24 interface
The V.24 interface is
not
active in this version of the firmware.
1.9.2
USB interface
This interface offers you the ability to connect a USB storage device. This
storage device is used for saving/loading the configuration and diagnostic
functions, and for upgrading the software.
Note:
The ACA22-USB storage device has been tested by Tofino Security
and is therefore recommended. You find the order number for the ACA22-
USB, which is available as accessory, under
“Accessories” on page 47
.
The USB interface has the following properties:
Supports the USB master mode
Supports USB 2.0 formatted as FAT or FAT32 (data rate max. 12 MBit/s)
Connectors: type A
Supplies current of max. 500 mA
Voltage not potential-separated
2
Loading configuration files from the USB storage
device
The SAVE/LOAD
LED will
illuminatein yellow.
After a few
seconds
theMODE, SAVE/
LOAD, and
RESET LEDswill
flash in yellow in a
right to
leftsequence to
indicate the USB
Loadis in progress.
3
Factory resetting the device
The following
LEDs
flashsimultaneousl
y: MODE, SAVE/
LOAD, RESET,
FAULT.
4
Canceling prior button presses
—
Button presses
Chosen function
LED behavior
Summary of Contents for Tofino Xenon
Page 51: ...Tofino Xenon Security Appliance Tofino SA Release 06 09 2018 51...
Page 52: ......
