®
S M P 2 - D / R P r o d u c t M a n u a l , R e v . B , M a r c h 2 0 1 9
Page 25
A set of tabs along the bottom of the page (below) gives users a variety of ways to make and break
single or multiple video and data connections.
1-CLICK:
Click on any Source and any Destination to make a connection.
Must be used in conjunction
with the other tabs listed below. (If 1-CLICK is highlighted, as shown above, then the highlighted source
is connected to a destination when that destination is selected. If 1-CLICK is not highlighted, then the
user can select the source and destination[s], then choose the action afterward.)
SHARE:
By default, when additional Destinations are connected to a previously connected Source,
they will all SHARE the video from the Source, but only the last one connected will have control of the
mouse, or data return (as shown by the mouse icon).
VIEW:
Each newly connected Destination can view the video but will not take the data return.
TAKE:
Each newly connected Destination removes the video from all previous Destinations and the
new Destination will have the data return.
BREAK:
Will break the connections of any highlighted Sources or Destinations
.
DESELECT:
Clears all highlighted selections at once.
LOCK:
A Source may be locked so that it may not be routed to a Destination. This applies whether
the Source is connected to a Destination or not.
UNLOCK:
Clears the locked state.
Note:
A Destination may also be locked by right-clicking on that Destination.
Summary of Contents for thinklogical SMP2-D/R
Page 1: ...Revision B March 2019...
